1/10 Jato 3.3 TQi 2.4 (Colors will vary)

  • $459.99


Traxxas 55077-3 1/10 Jato 3.3 TQi 2.4 w/Link Wireless Module Vehicle


FEATURES

Traxxas Stability Management (TSM): Superior tuning algorithms run
on high-speed electronic components to control wheel spin and
steering direction on loose dirt, concrete and even ice and snow.
TSM can be fine tuned or turned off by adjusting the multi-function
knob on the TQi transmitter or the slider in the Traxxas Link app.
Chassis: 1.16" (3mm) thick 6061 T6 aluminum, Blue-anodized, fully
countersunk with buggy style mud guards, and choice of
receiver pack placement-between the engine and fuel tank
or in the rear compartment
Drive Type: Two wheel with Universal joint axles with dust boots
operate at the most extreme deflection angles to allow for the most
suspension travel
Engine: Traxxas .20 cu in (3.3cc) racing engine w/Slide Valve Carb,
12mm diameter IPS crankshaft, foam air filter, Blue anodized
aluminum tuned pipe, extra glow plug, EZ-Start push-button
electric starter with battery and 2A DC peak detecting charger,
60% more peak horsepower than the TRX 2.5 engine
Radio: Traxxas TQi 2.4GHz high output with Traxxas Link automatic
model recognition, Bluetooth connectivity, 5 channel receiver with
telemetry ports, factory installed RPM, speed, temperature, voltage
and telemetry sensors, failsafe and wireless module is included
and enables model to be tuned from an iPhone 3G/3GS/4/4S, or
iPod Touch 2nd/3rd/4th generation (Traxxas Link App must be
be downloaded if wanting to use an iPhone or iPod Touch).
Intuitive, high definition graphical user interface featuring
Real-Time Telemetry, Customizable Dashboards, Steering/Throttle
Expo, Steering/Braking Dual Rate, Servo Reversing, Endpoint
Adjustment, Profile Customization and Sharing
**Docking Base not included**
Shocks: Four oil filled precision GTR Revo-style with threaded
composite shock bodies
Wheels: 2.85" (72.4) diameter 1.89" (48mm) wide Chrome finish
Ball Bearings: Full set, rubber sealed
Tires: Pre-glued Anaconda with horizontal bead design 3.93"
(100mm) diameter, 2.8" (71mm) wide
Body: Pre-painted Lexan racing truck style with decals applied,
available in Black with 4 striping color schemes depending on
radio channel choice, see COMMENTS
Gearbox: Sealed Revo-style silicone filled, with heavy-duty slipper
clutch constructed of semi-metallic friction material and finned
aluminum alloy pressure plates, spur gears can be removed and
replaced without altering slipper adjustment
Brake: Semi-metallic brake disc with steel pads eliminate fade caused
by heat buildup
Transmission: Internal, adjustable 2-speed with Torque Control
slipper clutch
Gear Differential: Sealed, limited slip, fully tunable with silicone
shock oils
Steering: Angled steering bellcranks for zero bump steer
Clutch: 2-shoe
Suspension: Fully adjustable including roll centers, anti-squat
and rear toe, ride height and weight bias also features 30° caster
blocks with 25° option and captured, hardened-steel hingepins and
captured double sheer rod ends
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when when viewed from front or behind vehicle
Fuel Tank: Low profile 2.5oz (75cc) flip top

 

 

INCLUDES

One pre-built Jato 3.3 truck, pre-painted Lexan body, owner's manual,
registration card, EZ Start handheld unit with battery and 2A
charger, TSM, extra air filter and oil, tool set, wheelie bar, DVD
operator's guide, 2-channel TQi 2.4GHz radio with Bluetooth
Connectivity, antenna tube and mount, extra glow plug, tools and
fuel bottle

 

 

REQUIREMENTS

Fuel: Car blend with 10-20% nitro content
Batteries: 8 AA four for transmitter and four for receiver
Building and field equipment